Peltier Cooler Model 2030/099/043MN

Peltier cooler model 2030/099/043MN is a member of Ferrotec’s family of Deep Cooling modules. The 2030/099/043MN peltier cooler is a three-stage, 99-couple, 4.3-amp module. The 'M' code indicates that this standard thermoelectric cooler features a solderable, metalized ceramic substrate on both hot and cold side external surfaces

 

2030/099/043MN — Mechanical Characteristics

Base W (mm) 21.7
Base L (mm) 28.3
Top W (mm) 8.6
Top L (mm) 13.0
Height (mm) 10.40

Performance Values

Values calculated at 50°C. I Max 4.3 ΔT Max 117.0
  V Max 8.1 Qc Max 6.1

 

Custom Options

Ferrotec can also customize a Deep Cooling Module for you based on the 2030/099/043MN.
Note: minimum quantity custom order limitations apply.

About Ferrotec’s Deep Cooling Module Family

The multi-stage peltier coolers in Ferrotec's Deep-Cooling Thermoelectric Module series are designed to provide significantly higher temperature differentials than are obtainable with standard single-stage modules. These multi-stage TECs are suitable for low temperature applications where a moderate cooling capacity is required. Typical applications for these specialized peltier coolers include IR detectors, CCD arrays, and electo-optics.

Ordering Information

  • Section 1: Contact Information

    * Indicates a required field

  • Please specify the peltier cooler or thermal solution that you are interested in, including part numbers and any special requirements. A brief description of your application is also helpful.
  • Section 2: Helpful information that isn't required to contact you

  • Section 3: Important Information about your TEC Application Requirements