Peltier Cooler Model 7200A/031/150B

Peltier cooler model 7200A/031/150B is a member of Ferrotec’s family of 70 Series modules. The 7200A/031/150B peltier cooler is a thermal cycling, 31-couple, 15.0-amp module. The 'B' code indicates that this standard TEC features a lapped type, plain ceramic surface.

 

7200A/031/150B — Mechanical Characteristics

Base W (mm) 29.8
Base L (mm) 29.8
Top W (mm) 29.8
Top L (mm) 29.8
Height (mm) 4.50

Performance Values

Values calculated at 50°C. I Max 15.0 ΔT Max 83.0
  V Max 4.4 Qc Max 35.0


Standard Performance Curves

 

Custom Options

Ferrotec can also customize a 70 Series Module for you based on the 7200A/031/150B.
Note: minimum quantity custom order limitations apply.

About Ferrotec’s 70 Series Module Family

The peltier coolers in Ferrotec's Thermal Cycling Thermoelectric Module series are specifically designed for temperature cycling applications. Thermal cycling exposes a peltier cooler to demanding physical stresses as the module shifts from heating to cooling, and this can significantly reduce the operational life of a standard TEC. Optimized for thermal cycling, intensive testing has shown that Ferrotec's 70-Series of thermal cycling TECs deliver significantly longer thermal cycling operational life. Typical applications that use these peltier coolers include instrumentation, chillers, PCR devices, thermal cyclers, and analyzers.

Ambient Temperature °C Step 1
Input modeling variables

Step 2
Click “Recalculate”
Thermal Resistance (Heat Sink) °C / Watt
Number of Modules
Starting dT °C

7200A/031/150B — Performance Curves

Note: Curves shown are calculated on a 'per module' basis.

Ordering Information

  • Section 1: Contact Information

    * Indicates a required field

  • Please specify the peltier cooler or thermal solution that you are interested in, including part numbers and any special requirements. A brief description of your application is also helpful.
  • Section 2: Helpful information that isn't required to contact you

  • Section 3: Important Information about your TEC Application Requirements