Peltier Cooler Model 9502/065/012 M

Peltier cooler model 9502/065/012 M is a member of Ferrotec’s family of General Purpose modules. The 9502/065/012 M peltier cooler is a single-stage, 65-couple, 1.2-amp module. The 'M' code indicates that this standard thermoelectric cooler features a solderable, metalized ceramic substrate on both hot and cold side external surfaces


9502/065/012 M — Mechanical Characteristics

Base W (mm) 12.1
Base L (mm) 11.2
Top W (mm) 12.1
Top L (mm) 11.2
Height (mm) 2.65

Performance Values

Values calculated at 50°C. I Max 1.2 ΔT Max 70.0
  V Max 8.9 Qc Max 5.8

Standard Performance Curves


Custom Options

Ferrotec can also customize a General Purpose Module for you based on the 9502/065/012 M.
Note: minimum quantity custom order limitations apply.

About Ferrotec’s General Purpose Module Family

Ferrotec offers a broad selection of general-purpose TECs in our standard line of thermoelectric modules. General-purpose peltier coolers are single-stage modules in a variety of common sizes and heat pumping capacities, and they are ideal for a wide range of cooling and precision temperature control applications. Ferrotec's general purpose thermoelectric modules are used in biomedical, laboratory and scientific instruments, consumer products, and industrial equipment. Standard substrates are lapped with +/-0.025mm tolerance.

Ambient Temperature °C Step 1
Input modeling variables

Step 2
Click “Recalculate”
Thermal Resistance (Heat Sink) °C / Watt
Number of Modules
Starting dT °C

9502/065/012 M — Performance Curves

Note: Curves shown are calculated on a 'per module' basis.

Ordering Information

  • Section 1: Contact Information

    * Indicates a required field

  • Please specify the peltier cooler or thermal solution that you are interested in, including part numbers and any special requirements. A brief description of your application is also helpful.
  • Section 2: Helpful information that isn't required to contact you

  • Section 3: Important Information about your TEC Application Requirements